Data Track tracker 211, Руководство пользователя

Страница: 13 / 20

Temperature & Process Measurement Indicators Setup Guide
20-5110 Issue G 11
the menu parameters until the measured value display is
restored.
b)
Editing a Value
Other parameters are changed by editing a value (eg. the
parameter
HdSP
has a default numeric value of [
100.0
]).
Press the
Next
Key to edit the flashing digit and the
Enter
Key to select the next digit for editing.
The following example will show you how to edit a numeric
value. We will change the high display value (labelled
HdSP
).

With the unit displaying the measured value, press and
hold down the
Enter
Key for approximately 3 seconds
until the display begins to flash.

Press the
Next
Key and the flashing display should be
replaced with the message inPt (the first menu parameter).

Press the Next Key repeatedly until HdSP is displayed.

Press the
Enter
Key and
100.0
will be displayed (with the
least significant digit flashing).

Press the
Next
Key to scroll through digit values
0
to
9
and edit the least significant digit.

To move to the next most significant digit, press the
Enter
Key and the digit will flash.

Repeat the previous 2 steps until the left most significant
digit is flashing.

Press the Next Key to scroll through digit values -1 , - and
0
to
9
.

If the value allows the
dP
position to be moved, the
dP
will flash. To move the
dP
position, use the
Next
Key.

Press the
Enter
Key to save this value and exit. When the
Enter
Key is pressed and the left most significant digit is
flashing, the display will return to the menu parameter, ie.
HdSP
.

Press the Next Key repeatedly to scroll through the rest of
the menu parameters until the measured value display is
restored.