Data Modul IX945GSE2 Скачать руководство пользователя страница 30

Страница: 30 / 65

User’s Manual

IX945GSE2 User’s Manual

5. Line In port (light blue).

This port connects a tape, CD, DVD player, or other audio

sources.

6. Line Out port (lime).

This port connects a headphone or a speaker. In 4-channel,

6-channel, and 8-channel configuration, the function of this port becomes Front Speaker

Out.

7. Microphone port (pink).

This port connects a microphone.

8. USB 2.0 ports 3 and 4.

These two 4-pin Universal Serial Bus (USB) ports are available

for connecting USB 2.0 devices.

9. USB 2.0 ports 1 and 2.

These two 4-pin Universal Serial Bus (USB) ports are available

for connecting USB 2.0 devices.

10. VGA port.

This 15-pin VGA port connects to a VGA monitor.

11. Serial connector.

This 9-pin COM2 port is for serial devices.

12. PS/2 keyboard port (purple).

This port is for a PS/2 keyboard.

1.9.2 Internal connectors

1.9.2.1 Front panel audio connector (10-pin AAFP1)

This connector is for a chassis-mounted front panel audio I/O module that supports either

HD Audio or legacy AC’97 audio standard.

It is recommended that you connect a high-definition front panel audio

module to this connector to avail of the motherboard’s high-definition

audio capability.

Содержание IX945GSE2


































































Результаты поиска

Содержание IX945GSE2

Отзывы:

Похожие инструкции для IX945GSE2

Бренды по названию

Популярные бренды

Data Modul IX945GSE2, Руководство пользователя

Результаты поиска

Содержание IX945GSE2

Отзывы:

Похожие инструкции для IX945GSE2

Бренды по названию

Популярные бренды