background image

DATA-LINC GROUP

p

 

                            LCM100 User’s Guide

 

 

LCM100 Technical Specifications 

Power requirements 

120 volts at +/- 10%, 50-60 Hz, 4.5 watts. Power is on when 
module(s) are connected 

Data Rate 

Up to 9600 baud 

Data Formats 

Any serial asynchronous format up to 9600 baud 

Operation Full 

Duplex 

Receive Sensitivity 

20 millivolts 

Transmit Level 

250mW into 3 ohms 

Interface 

EIA RS-232C Interface Standard 

Mating Connectors 

Female, DB-25P 

FSK Carrier 

Highband: Space 150 kHz, Mark, 156.5 kHz 
Lowband: Space 100 kHz, Mark, 106.5 kHz 
Bandwidth: 10 kHz 

Indicators 

Power: Red LED indicates power on 
Carrier Detect: Green LED indicates carrier signal is being 
received over power line from other module 

Environment 

Operating Temperature: 32

o

 to 158

 o

 F (0 to 70

 o

 C) 

Storage: -40to 185 F (-40

o

 to 85 C) 

Humidity: Up to 90% (non-condensing) 

 
Dimensions 

7.25” x 4.85” x  2.55” (184mm x 123mm x 64mm) 

 

Technical Support 

Data-Linc Group maintains a fully trained staff of service personnel who are capable of providing 
complete product assistance. They can provide you with technical, application and 
troubleshooting, spare parts and warranty assistance. Our technical staff are based in Redmond, 
Washington USA and may be reached at 425.882.2206 or email [email protected] 

 

Product Warranty 

Data-Linc Group warrants equipment of its own manufacture to be free from defects in material 
and workmanship for one year from date of shipment to original user. Data-Linc Group will 
replace or repair, at our option, any part found to be defective. Buyer must return any part 
claimed defective to Data-Linc Group, transportation prepaid. 

 

Return Material Authorization 

If a part needs to be sent to the factory for repair, contact Data-Linc Group’s corporate office and 
request a Return Material Authorization (RMA) number. The RMA number identifies the part and 
the owner and must be included with the part when shipped to the factory. 

 

Contact Information 

Corporate 

Office 

  Data-Linc 

Group 

     3535 

Factoria 

Blvd. 

SE 

     Suite 

100 

     Bellevue, 

WA 

98006 

 

 

     Telephone: 

425.882.2206 

     Fax: 

425.867.0865 

     Email: 

[email protected] 

     Web 

site: 

www.data-linc.com

PN 161-09998-001A 

5

Get other manuals https://www.bkmanuals.com

Содержание LCM100











Отзывы: