DATA-LINC GROUP
26
PN 161-10008-001A
rev 4/04
DLM4500 User Guide
$LB=
n Lenth of Break
Values:
n= 0-255 (1 = 10ms)
Default: 003 (30 ms)
$MB
n Online BPS Speed
Values:
n = speed in bits per second
Default: 28,800
Description: $MB75 Selects CCITT V.23 mode
$MB300 Selects 300 bps on-line
$MB1200 Selects 1200 bps on-line
$MB2400 Selects 2400 bps on-line
$MB4800 Selects 4800 bps on-line
$MB9600 Selects 9600 bps on-line
$MB14400 Selects 14,400 bps on-line
$MB19200 Selects 19,200 bps on-line
$MB28800 Selects 28,800 bps on-line
$MB33600 Selects 33,600 bps on-line
$SB
n Serial Port Baud Rate
Values:
n= speed in bits per second
Default: 115200
Description: $SB300 Selects 300 bps at serial port
$SB1200 Selects 1200 bps at serial port
$SB2400 Selects 2400 bps at serial port
$SB4800 Selects 4800 bps at serial port
$SB9600 Selects 9600 bps at serial port
$SB19200 Selects 19,200 bps at serial port
$SB38400 Selects 38,400 bps at serial port
$SB57600 Selects 57,600 bps at serial port
$SB115200 Selects 115,200 bps at serial port
$SB230400 Selects 230,400 bps at serial port
#S
x Enter Setup Password
Values:
x= password (1–8 characters, case sensitive)
Default: MTSMODEM
Description: Enters the remote configuration setup password.
#S=
x Store Setup Password
Values:
x= password (1–8 characters, case sensitive)
Default: MTSMODEM
Description: Stores a new remote configuration setup password.
+++ Escape Sequence
Values: n/a
Description: Puts the modem in command mode (and optionally issues a command) while remaining online. Used mostly
to issue the hang-up command: [pause] +++ [pause] ATH<CR>.
