DATA-LINC GROUP
PN 161-09981-002C
Product User Guide
FCC Notification
This device complies with part 15 of the FCC rules. Operation is subject to the following conditions:
1)
This device may not cause harmful interference and
2)
This device must accept any interference received, including interference that may
cause undesired operation.
The device must be operated as supplied by Data-Linc Group. Any changes or modifications made to the
device without the express written approval of Data-Linc Group may void the user’s authority to operate the
device.
Caution: This device has a maximum transmitted output power of 955 mW. It is required that the
transmit antenna be kept at least 23 cm away from nearby persons to satisfy FCC RF exposure
requirements.
Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a industrial installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Note: Whenever any Data-Linc Group SRM series modem is placed inside an enclosure a label must be
placed on the outside of that enclosure which includes the modem’s FCC ID.
The following antennas are approved for use with Data-Linc Group’s 900MHz series modems.
NOTE: Per FCC Rules, the maximum power allowed at the antenna is 4 Watts E.I.R.P.
900MHz Directional Antenna
Gain
Manufacturer Manufacture Model Number Data-Linc Model Number
8.2 dBi
Larsen
YA6900W
A-YB
11 dBi
Larsen
YA5900W
A-YHB
900MHz Omni-Directional Antenna
Gain Manufacturer
Manufacture Model Number Data-Linc Model Number
5.2 dBi
Maxrad
MAX9053
A-OB
7.2 dBi
Maxrad
MAX9075
A-O5B
0 dBi
Ying Hao
YH920801/AD-725-A-1
A-06/ADJ
0 dBi
Centurion
EXC-902-BN
A-06BH-3S / 10S (**)
(**) This part number refers to an antenna kit(s). The 0 dBi refers to the antenna portion of the kit.
Note: The antenna used for this device must be professionally installed on a fixed-mounted permanent
outdoor structure for satisfying RF exposure requirements, including antenna co-location requirements
of 1.1307(b)(3).
