POS-Line Video PIII
29
PIP (Picture in Picture) Sub Menu
PIP mode:
Toggle between Off, PAP-Tall, Side-
by-Side, Small PIP and Large PIP.
Vertical:
Vertical position of PIP image.
Horizontal
Horizontal position of PIP image.
Transparency:
Transparency of PIP image.
Tiling Sub Menu (for video walls)
Horizontal Total:
Defines the total horizontal number
of displays.
Vertical Total:
Defines the total vertical number of
displays.
Horizontal Position: Defines the horizontal position of
the actual display unit.
Vertical Position: Defines the vertical position of the
actual display unit.
Tiling Status:
Enables/ disables the tiling function.
If the PIP-Mode is PAP-Tall or side-
by-side, the tiling status will be off
and disabled.
Example: 3 by 3 video wall: Definition of Horizontal/Vertical display position:
Position
1
2
1
1
1 / 1
2 / 1
3 / 1
2
1 / 2
2 / 2
3 / 2
3
1 / 3
2 / 3
3 / 3
Note:
• Tiling property cannot be used while PAP-Tall or Side-by-Side modes are active.
• If PIP is turned on, the PIP image would be displayed on every panel of the video wall.
• Image and position menus are disabled while tiling is on.
• For best results, the Horizontal Total and Vertical Total value should to be set to a value which is an integer divider of the input
width or height, respectively. For example, if input is 1280x768, horizontal total has to be set to one of 2, 4, 5, 8 and vertical total
has to be set to one of 2, 3, 4, 6, 8.
