Data Connect DCE 2178HSEE, Руководство пользователя

Страница: 22 / 32

22
3.2 Connecting
2178HSEE / 2178HSEE4
3.2.1 Connecting Standalone PC
Refer to the following procedures to setup the 2178HSEE
to a standalone PC.
1. Set the 2178HSEE to be CO mode or CPE mode from the DIP
switch at the rear panel.
2. Power on the 2178HSEE by connecting its power source.
3. Power LED will illuminate.
4. Use one RJ-11 wire and make a connection between 2178HSEE
and “Line” port of splitter from 2178HSEE package.
5. Connect VDSL line from another VDSL device to DSL port of
the splitter that connects to 2178HSEE VDSL port.
6. LNK LED will from blinking to illuminate.
7. Connect telephone to the PHONE port of the splitter that
connects to 2178HSEE VDSL port.
8. Connect 2178HSEE Ethernet port to PC Network Interface Card
(NIC) via regular Cat. 5 cables.
Telephone wire
100Base-TX UTP
2178HSEE
Phone
RJ-11 Phone Jack PC
Splitter
RJ-11 Line Cord
RJ-11 Line Cord
Phone
RJ-45 Cat.5
Twisted Pair Cable
VDSL
TP
Figure 3-3: Connecting Standalone PC