2
Introduction
Thank you for purchasing the 2.5” HDD Enclosure Kit.
Your 2.5” HDD enclosure enables blazing fast data transfer speed and instant addition
of external storage capacity. Simply complete the installation process to begin using
your enclosure.
Important Reminders for all Enclosures
1)
The main circuit board of the HDD enclosure is susceptible to static electricity.
Proper grounding is required to prevent electrical damage to the enclosure or
other connected devices, including the computer host. Always place the HDD
enclosure on a smooth, flat surface and avoid all dramatic movement,
vibration and percussion.
2)
Do NOT allow water to enter the HDD enclosure.
3)
Avoid placing the HDD enclosure close to magnetic devices (such as a mobile
phone), high-voltage devices (such as a hair dryer), or near a heat source
(such as on the dashboard of a car or any place where the enclosure will be
subject to direct sunlight).
4)
The operating system may NOT detect the HDD enclosure if it does not
support the interface of your HDD enclosure. If so, installation of an
appropriate driver on the host computer is required.
5)
Ensure that only a 9.5mm high 2.5” HDD is used in the enclosure. The
Enclosure will not function if an older model HDD with a different thickness is
used. Additionally the enclosure and other equipment may be damaged.
Please thoroughly read and follow the instructions provided in this
manual. Failure to do so may result in damage to the enclosure and
any or all of the connected devices.
