Dass DSP-123K5-OD, Руководство по эксплуатации и установке

Страница: 5 / 23

4
(5) Disposal

Dispose as a general industrial waste.
(6) Others

The pictures in this operation and installation manual occasionally drop the cover or breaker in order to
explain in detail, however, you must strictly follow the guidelines in this manual for operation after
installing the cover and breaker.
Directions for Installation
(7) Installation

Follow the instructions in this operation and installation manual.

This product must be installed indoor. or outdoor

Be careful not to install this device at wet, dusty, direct ray of sun light or high temperature place.

In the event of indoor installation, secure the space at least 20cm from the top, bottom, left and right side of
the inverter.

In the event of outdoor installation, secure the space at least 1m from the ground surface.

Installation must be carried out by a technical expert.

Do not place any heavy items on the product.

Do not spray or keep away from any inflammable materials.

Installation direction must be set followed by the guidelines in this manual.

Do not drop or add damage to the inverter, as this device is a précised one.

Do Class 3 grounding work (200V class) for the inverter.
 Don’t place other home appliance near this device. Otherwise, a fault or noise of home appliance may
happen.

Always use T-type hanger, and be careful not to be damaged by a sharp part.

Install the circuit breaker of solar cell side (DC) and install the inverter. And then operate this device after
completing the installation and turning on the power of solar cell. If you operate the inverter when the
power of solar cell (DC) is “ON”, a serious damage may happen.
(8) Wiring

If you make wrong connection, damage may happen on the inverter.

Please be careful in the event of wrong connection in the polarities (+/-) of DC power, damage may happen
on the inverter or a serious accident may occur. Refer chapter 3 for detailed Descriptions.

Please be careful of sorting power and ground wire when connecting AC Connecter. Refer chapter 3 for
detailed Descriptions.

The technical expert should carry out the wiring work or check.

After install the inverter body, carry out the wiring work.
(9) Adjustment at the time of commissioning