DASS Tech Soleaf Air DSR-004-OD, Руководство пользователя

Страница: 10 / 21

10
3.2 Installation Location
Install it in a location that meets the following conditions:

To prevent life or performance degradation, install Soleaf Air in a location that does not
receive direct sunlight.

Do not install it in a place with vibration.

As the lifetime of the product is greatly affected by ambient temperature, do not allow the
ambient temperature of the installation site to exceed the allowable temperature (20°C to
50°C).

Avoid hot and humid places (relative humidity is below 90% and there should be no dew
formation).

Avoid locations with oil mist, flammable gas, fiber dust, dust and moisture.

Install at the place where no salt exists.

Install in a location where the Wi-Fi signal is highly sensitive. Poor Wi-Fi signal sensitivity will
prevent smooth communication. (Check sensitivity using Wi-Fi sensitivity measurement
application.)

Avoid places with low signal sensitivity, such as walls or enclosures.
3.3 Installation Precautions
l Follow the instructions in this operation and installation manual.
l This product may be installed indoors and outdoors.
l Be careful not to install in a wet, dusty, direct ray of sun light or high temperature location.
l When installing outdoors, make sure that there is at least one meter of space from the
ground.
l Do not place any heavy items on the product.
l Do not spray or place flammable substances on this product.
l Installation direction must be set followed by the guidelines in this manual.
l Do not drop or cause damage with shock.