Dascom TALLY MIP480, Руководство пользователя

Страница: 34 / 138

Printing
3-4
Sleep Mode
The printer has a power saving feature (Sleep Mode). If the printer is in sleep mode state,
the power consumption is lowered to 2W instead of 7W in normal mode. This feature is
usefull if you want to save energy of the car battery.
If the printer receives data while in sleep mode, it automatically is set to normal mode and
ready to print.
Entering Sleep Mode
To enter the Sleep Mode:
•
Press and hold depressed the POWER/SLEEP key for five seconds to enter Sleep
Mode.
While in sleep mode, the READY LED blinks slowly (all 5 seconds), all other LEDs of the
control panel are off.
Leaving Sleep Mode
To leave the Sleep Mode:
•
Press the POWER/SLEEP key for one second to leave Sleep Mode or send data to
the serial, USB or internal Bluetooth module.
NOTE: If any interface is connected to the parallel port of the printer, this interface will
be turned off while entering the power saving condition.
NOTE: You can adjust the duration of time after which the printer automatically enters
Sleep Mode in Set-Up mode via the option <PWRDWNHRS>. See the section
“INSTALL Options and Values” in Chapter 4, “Using Special Mode”.