© 2021 DASCOM Drivers, User Manuals and SW Utilities available @
www.dascom.com
Control Panel indicators
Control Panel
Power Button
Power Up
Power Down
Toggle IP over USB
on/off
Press & Release
Press & Hold
Press twice
Paper Feed Button
Advance paper
Print Setup Report
Press once (LF) or long (FF)
Press twice
Power & Status
(Green/Red)
(Yellow)
Alert
(Red)
Indication
On
Off
On
Booting up(
…
20 sec!)
On
Off
Off
Ready
On
Off
Flashing
Paper Error/Lid Open
Flashing
Off
Off
Job is arriving
Flashing
Off
Off
Job is printing
Flashing
Off
Flashing
IP over USB active
Flashing
Flashing
Flashing
Restart the printer manually
Off
Off
Flashing
Restore the printer firmware
Off
Off
On
Print head too hot
Accessing the Configuration Menus through USB
1.
Turn the printer ON.
2.
Connect a USB cable between the printer and a PC.
3.
To access the DP-581 web page, push the Power button twice rapidly. This will put the printer into Configuration mode.
4.
When the printer is in Configuration mode the POWER and FAULT LEDs will flash together.
A. Open browser on your PC and type 169.254.200.1 into the address bar of the browser and hit Enter - A login box should appear:
B. Type “0000” and hit Enter- you should now be at the home page for DP-581 Configuration.
5. Push the Power button twice rapidly to exit Configuration Mode.
Dascom Representatives
Americas
Dascom Americas Corp
34 Lakeview Court
Verona, VA 24482, USA
Phone:
+1 (877) 434 1377
UK
DASCOM GB Ltd
Hart House, Priestley Road
Basingstoke, Hampshire, RG24 9PU
Phone:
+44 (0) 1256 481481
Germany
DASCOM Europe GmbH
Heuweg 3
D-89079 Ulm
Phone:
+49 (0) 731 2075 0
France
DASCOM Europe GmbH
117 Avenue Victor Hugo
92100 Boulogne-Billancourt
Phone:
+33 (1)73 02 51 98
Singapore (AP)
DASCOM AP Pte Ltd
2 Jurong East Street 21
#05-42, IMM Building, Singapore 609601 Phone:
+65 6760 8833
DP-80 Quick Start Guide
Once the printer is connected via USB and in
IP over USB
mode it is temporarily not possible
to access the Internet.
21.511.919.0121R-EN
Some country specific Windows Operating Systems does not have activated or installed the
RNDIS driver to use the IP-over-USB mode. Therefore, please refer to our Dascom Internet pages!
