Dascom DP-510, Руководство оператора

Страница: 17 / 19

WALL AND BELT MOUNTING INSTRUCTIONS
A combined bracket/clip suitable for attaching the printer to a wall or belt is available
The bracket snaps into the bottom of the printer, and when used to clip to a belt, it may be secured by using the
supplied extended screw (replaces the battery compartment screw). Prior to use, two small 'break-outs' must be
removed from the battery cover of the printer as shown below:
Remove the two 'break-outs'
using a small screwdriver.
When attaching to a belt, the bracket should be put on the printer first, and then the entire assembly clipped over the
belt as shown:
The securing screw may be used if required.
When attaching to a wall, the bracket must be located on the wall using screws and wall plugs as shown. The printer
may then be clipped into place and removed as required.
Use a finger or small screwdriver to
release the clip and then gently lift the
printer to remove from the wall bracket.
13