Dasan V8102, Руководство пользователя

Страница: 692 / 910

UMN:CLI
User Manual
V8102
692
Command Mode Description
auto-cost reference-bandwidth
<1-4294967>
Router
Configures default metric in the unit of Mbps.
(default: 100Mbps)
To delete the configuration, use the following command.
Command Mode Description
no auto-cost reference-
bandwidth
Router Deletes the configuration.
12.3.8 Graceful Restart Support
You need to restart OSPFv3 protocol processor when there is network problem. In this
case, it takes long time to restarts OSPFv3 and there is no packet transmission. Other
routers are also need to delete routing information and register it again. Graceful Restart
improves those inconveniences. Although OSPFv3 is restarting, Graceful Restart makes
the transmission of a packet with routing information.
To configure the Graceful Restart, use the following command.
Command Mode Description
capability restart graceful
Router
Configures the Graceful Restart.
no capability restart Releases the configuration.
To configure the additional options for Graceful Restart, use the following command.
Command Mode Description
ipv6 ospf restart grace-period <1-1800>
Global
Configures the additional options for
Graceful Restart.
only-reload: helps only on software
reloads.
only-upgrade: helps only on software
upgrades.
max-grace-period <1-1800> : helps only
if received grace-period is less than this
value.
router-id: router of neighbor to never to
act as helper.
ipv6 ospf restart helper max-grace-period <1-
1800>
ipv6 ospf restart helper max-grace-period <1-
1800> only-reload [ only-upgrade ]
ipv6 ospf restart helper max-grace-period <1-
1800> only-upgrade [ only-reload ]
ipv6 ospf restart helper only-reload [ only-
upgrade ]
ipv6 ospf restart helper only-reload only-
upgrade max-grace-period <1-1800>
ipv6 ospf restart helper only-reload max-
grace-period <1-1800> [ only-upgrade ]
ipv6 ospf restart helper only-upgrade [ only-
reload ]
ipv6 ospf restart helper only-upgrade only-
reload max-grace-period <1-1800>