Dasan DA911W Скачать руководство пользователя страница 6

2.4GHz FHHS DIGITAL Transmitter/Receiver   

MODEL: DA911W                 

                    USA VERSION

 

                                                                                DASAN Electron

 

PREPARING FOR INITIAL USE 

1.

 

setting the Battery on transmitter. 

2.

 

Ensure that the Li-ion battery is installed and fully charged before initial use. 

3.

 

Check line and power connections. 

4.

 

Push the transmitter TALK button to confirm. If you do not get a LED display, please refer to the 

Troubleshooting chart. 

 

 

OPERATION 

5.

 

Supply 12 VDC power into the BASE using the provided AC adaptor. 

6.

 

Separate the transmitter from the BASE and turn on the transmitter. 

7.

 

Push the TALK button on the transmitter. When the antenna icon on the LED of the transmitter is 
displayed steadily, the communication channel between the BASE and transmitter has been setup and 
the transmitter is transmitting the audio signal. On the other hand, when the antenna icon blinks, the 
frequency channel between the BASE and transmitter does not match. Place the transmitter in its cradle 
on the BASE. Put Transmitter on the Receiver (Charging). Press and hold 
TR's talk button over 5 secs. Unhold the talk button. The TR+RE' Green LED is blinking 5 times 
and will be heard a confirm tone. the communication channel has been setup and the transmitter 
is ready to operate normally. 

8.

 

When the antenna icon is displayed on the LED window of the transmitter by pressing the toggling 
TALK button, the transmitter is transmitting the audio signal and the BASE outputs the active-high 
digital signal on the talk-mode output pin. 

9.

 

When the active-low digital signal exists on the video-on input pin of the BASE, a recorder icon is 
displayed on the LED window of the transmitter. 

10.

 

When the distance between the BASE and transmitter is within the coverage area, both the recorder and 
antenna icons are displayed steadily by providing the video-on signal on the BASE. On the other hand, 
when the distance between the BASE and transmitter is out of the coverage area, the recorder icon turns 
off and the antenna icon blinks. 

11.

 

When recording is finished, turn off the transmitter and place it in its cradle on the BASE for charging. 
 

TROUBLE SHOOTING 

 

 

SYMTPOM SOLUTION 

 

No recording sign   

 

Check for the line cord connectors at both ends that they are pushed in firmly until they 

click.(docking & recorder) 

 IF you had a power failure or had unplugged the docking station, replace the transmitter 

on the docking station for two to five seconds to reset the system. 

   

 

No power on the 

transmitter unit 

 

Check the Ni-MH battery pack connection inside the battery compartment on the 

transmitter. 

The transmitter rechargeable Li-ion battery pack may need to be charged. 

 

 

Does not charge 

 

Make sure the charging contacts on both the docking station and the transmitter are in 

Содержание DA911W








Отзывы: