- 8 -
General procedure
z
Turn on Bluetooth on your phone
z
Put the headset in pairing mode (make sure the headset is switched off, press
and hold the answer button for 4-5 seconds until the LED flashes red and green)
z
Perform a search for Bluetooth devices on your phone.
z
Connect to >>device logo<< when found. The PIN code is 0000 (four zeros)
Different phones have different ways to handle Bluetooth devices. Read the users
manual of your phone for more info. Some phone for more info. Some phones will
connect to the headset automatically when it is within range, for example when you
return to your office. For other phones, it may be necessary to reconnect manually
when the connection has been broken.
The pairing mode is active for 3 minutes. After that, the headset will enter standby
mode
.
..
Answer a call
z
Press the answer button briefly.
Make a call
z
Dial the number on the mobile phone and press the answer button briefly.
End a call
z
Press the answer button briefly, or end the call on the mobile phone.
Using the headset
- 9 -
Headset ring alert adjustment
The type of ring alert signal in the headset will vary depending on your telephone
model. Some phones will transfer your ordinary ring melody to the headset. In these
cases, the volume and ring melody adjustments are made in the phone.
With other telephone models, there is an internal ringer alert in the headset when you
receive an incoming call. This ringer alert tone can be set to two different modes.
For using this function, disconnect Bluetooth device with the phone.
z
Press and hold Volume Up and Down simultaneously for 1 second. A beep tone
is heard in the speaker.
z
To resume the default setting, press Volume Up and Volume down
Volume adjustment
z
Press volume up/volume down to adjust the
listening volume. There is a small notch on
each volume button that makes them easy to
find. The headset listening volume can also
be adjusted on the phone.
Note that high listening volume settings may
cause echo or other noise on the line, for one
or both parties on the line. Try to lower the
listening volume if this is the case
.
Important! – High listening volume settings
may be harmful to your hearing.
