22
Manual del Usuario
/ UX series /
User’s Manual
Unless it has already been done,
place the enclosure on top of a
PL-
UX218RS
platform.
Note:
Bear in mind that the unit
is not attached to the platform via
quick release pins like other
models.
It is in these preparation steps
that you need to take into account
which units go forward and which
ones go backwards in cardioid
configurations.
In our example, since it is not a
cardioid configuration, all units go
forward.
We'll place another unit on top
of the one we already had with the
guides exposed.
Align the holes and engage the
quick release pins on both sides of
the enclosures as indicated in the
attached figure.
The result can be seen in the
attached figure.
In our examples we will only
stack two units, but, as you may
remember, the platform allows for
stacking up to three units.
