17
Manual del Usuario
/ Quantum series /
User’s Manual
1 2
loud
125Hz
0.0m
O
0 dB
INPUT
CLIP
C
DISPLAY (only
Q-10A
)
By default the state of the screen is the following:
Once the input source has been connected to the
amplifier´s cabinet, the user has to check the gain
structure of the system.
Adjust level output from your processor and/or mixing
console in order to prevent INPUT CLIP (left signal meter),
as shown below in the channel 1:
Peak
measurers
RMS
measurer
Exceeding the limits
may cause damage
in the system!!
After having set the input volume values under the
maximum level, user has to adjust output volume with
the master control. The level is shown in the right meter in
the screen. As with the inputs be careful not to exceed the
limit (LIMIT shown):
Exceeding the limits
may cause damage
in the system!!
After these two volume adjustments the screen will
show something like this (when having the input sources
ON):
MAIN MENU:
As stated previously by pushing the encoder the user
can access the following options in the MENU:
Note: to enter and select and option always push the encoder. For going back in the menu, the user has to select Back in
the screen and press the encoder or just pushing the encoder.
After 30 seconds without touching the button, the unit will return to the main screen automatically.
PRESETS:
Two factory settings (loud and deep) depending on
the type of music/use has been configured by default:
With the encoder go to Preset Sub-menu and press
the knob to access the different options:
By scrolling down the encoder more options appear:
1 2
loud
125Hz
0.0m
O
0 dB
1 2
loud
125Hz
0.0m
O
0 dB
LIMIT
L
1 2
loud
125Hz
0.0m
O
0 dB
MAIN MENU
BACK
PRESET: loud
LPF: 125Hz
MAIN MENU
BACK
OPTIONS: off
Delay: 0.0m
1 2
loud
125Hz
0.0m
O
0 dB
loud preset
MAIN MENU
MAIN MENU
MAIN MENU
BACK
BACK
BACK
PRESET: loud
LPF: 125Hz
LPF: Off
LPF: 125Hz
PRESET:
l
oud >
PRESET:
<deep
MAIN MENU
MAIN MENU
MAIN MENU
BACK
BACK
BACK
PRESET:
loud
PRESET:
loud
PRESET:
loud
LPF (Low Pass Filter):
There are 3 different options:
LPF:
<125Hz>
LPF:
<90Hz>
LPF:
<170Hz
