The PCM3.0 - PCM3.1 Head Unit module (fig.10)
(fig.10).
10
10
Video-IN
White cover
Multiconn Srl
Multiconn Srl
4
99
.1
.1
PCM3.0
PCM3.0 –– PCM3.1
PCM3.1
Insert the 2 female crimped pins of
DAS
cable (fig.9.1
fig.9.1 DCABMQS-RCA)
inside the black 12P housing and then in white Fakra cover. In case these
connectors are already available in the unit, just connect the pins in the pin-
out position recommended below.
Insert the wire with label
++
in pin 27
pin 27 (positive signal).
If the pin 27 is already used by rear camera, connect to pin 26
Insert the wire with label
--
inside the pin 24
pin 24 (negative signal).
If the pin 24 is already used by rear camera connect pin 25
Black 12P
White cover
www.eldibg.com
car audio & multimedia system
