DAS DAS-M44HD-CI-CAN, Инструкция по установке и эксплуатации

Страница: 2 / 23

Multiconn Srl Pag. 2 of 23 DAS-M44HDCI -CAN- User Manual (EN)
INSTALLATION AND USER’S GUIDE – DAS M44HD-CI-CAN
Warnings: Important Safety Instructions and Caution
Please read all of these instructions regarding your unit and retain them for future reference
•
Read this manual fully and carefully before operating DAS digital receiver
•
Keep this manual handy as a reference for operating procedure and safety information
•
Pay close attention to all warnings and follow the instructions carefully
•
Do not allow other people to use the system until they have read and understood the operating
instructions.
•
Do not push objects of any kind into this product through openings as they may touch dangerous
voltage points or short- out parts that could result in a fire or electronic shock
1) Don’t use or perform any function while driving
This could cause accident, endangering both your safety and the safety of others; always observe safe
driving rules and follow traffic regulations. If prolonged intervention on the unit is necessary, stop the
vehicle in a safe place and make adjustments.
2) Video output
For your safety, ensure that the DRIVER monitor is connected to the video OUT DRIVER.
If the connection to the handbrake and the menu settings have been done properly, the Video
DRIVER will only work with the handbrake on and therefore only with the vehicle still.
Viewing images while driving is forbidden and dangerous!
See pag.5 for handbrake setting.
3) Check for correct power supply
4) Don’t disassemble, tamper with or attempt to repair any part of the product
Any such actions will immediately void the warranty and may lead to damage, accidents or injury.
5) High temperature and humidity may compromise operations
Do not expose the unit to rain and moisture
If any solid object or liquid fall into the cabinet, unplug the unit and have it checked by qualified
personnel before operating it any further.
6) The unit must be installed by experienced personnel only
7) Wrong wiring may cause problems to the vehicle as well as damage, accidents and injury
Do not attempt to install or service your DVB-T receiver by yourself.
Do not install the unit where it may:
1) Obstruct the driver’s attention;
2) Impair the performance of any of the vehicle’s operating systems or safety features including
airbags, hazard lamp buttons etc;
3) Impair the driver’s ability to safely operate the vehicle.
8) Before wiring, disconnect the cable from the negative battery terminal
9) Don’t use bolts or nuts in the brake or steering systems to make ground connections
10) Arrange the wiring so it is not crimped or pinched by a sharp metal edge
11) Connect and use only very good quality antennas