DAS Aero 12A, Руководство пользователя

Страница: 9 / 24

The compact line array system joins
the family of professional sound touring
products.
The system incorporates an impressive battery
of high tech features that take compact line array
systems
to an unprecedented level of
performance. The latest in Class D power
amplification, digital processing and optimized
D.A.S. components have been combined with
enclosures designed for rapid deployment, precise
coverage and high acoustic output.
The
æro
12A
æro
æro
æro
series
12A 12LN4C
M-
75N
BPS-9010
PL-12S AX-aero12
KITGS-AX-aero12
12A AX-Combo12
æro12A’s
incorporates a D.A.S. ,
12” low frequency transducer. The transducer
employs a 75 mm (3”) voice coil and neodymium
magnet motor assembly. Effective heat evacuation
is achieved by way of the Total Air Flux (TAF)
cooling
scheme which permits high power
handling and low power compression.
High frequency reproduction relies on the
exceptional characteristics of the new D.A.S.
neodymium comprssion driver designed for
use in applications where high SPL and low
distortion are required. A pure titanium diaphragm
featuring a 75 mm (3”) copper-clad, aluminium flat-
wire voice coil yields high sensitivity, low distortion
and extended frequency response. Each motor
system has a copper shorting ring surrounding the
pole piece which effectively reduces eddy current
induced distortion with the added benefit of
increasing the very high frequency output by
reducing the inductive rise of the voice coil. The
driver is attached to a new
aluminium
waveguide-horn assembly.
The (steel stacking dolly),
(rigging bumper) and (stacking
pods) accessories allow for any type of satcked or
flown of the
system. The
allow the to be flown below other
products.
æro
12A
The easily portable and rugged enclosure is
manufactured using Birch plywood and finished
with
a durable black paint. The
trapezoidal shape and rear located splay angle
adjusters keep the front spacing between adjacent
elements the same, providing the array with a
“seamless”
front baffle, for improved array
performance. The captive rigging system splay
angles range from 0º to 10º and can be adjusted
in 0.5º increments from 0º to 3º, and 1º increments
from 3º to 10º allowing a wide range of column
curvatures to be accomplished.
3
SYSTEM DESCRIPTION
LINE DRAWING
The two-way amplifier design of the
sets a new industry benchmark in audio
performance, efficiency and power density. This is
made possible by employing 3rd generation Class
D technologies which have significantly improved
three
key parameters, audio performance,
efficiency and weight.
The 600W amplifier provides extended
bandwidth, improved dynamic range and
exceptionally low distortion. Impressively compact
in size and light in weight, its high power density of
over 20W per cubic inch promotes an ampliifer
design that requires much less space, reducing
the overall cabinet size and in turn, the total
cabinet weight-an important attribute for flown
systems. The high efficiency of the
amplifier ensures cool operation so that no fans or
bulky heatsinks are needed.
Signal processing is accomplished by way of a
powerful 24 bit DSP providing unparalleled control
over
critical signal parameters. Digital Finite
Impulse Response (FIR) filters are used in the
signal processing of the
æro
æro
12A
12A
. Using powerful
Wavelet analysis to provide an accurate time-
frequency representation combined with precise
adjustment of the FIR filters, D.A.S. engineers are
able to achieve perfect time alignment.
The system is protected by two types
of limiters-an instantaneous peak limiter to
safeguard the systems against spikes and a
sonically transparent RMS limiter that controls
excessive overpowering and thermal damage to
components.
This combination provides
comprehensive protection for both the speaker
components and signal electronics.
æro
æro
12A
12A
ALL DIMENSIONS IN MILIMETERS
688
316
385
EN
Manual del Usuario
/ aero 12A / User’s Manual