DarwinFPV BabyApe II, Руководство пользователя

Страница: 17 / 18

BabyApe Π
www.darwinfpv.com
① Press and hold the Boot button to connect to the computer to enter DFU mode; after
the connection is successful, DFU will be displayed at the port of Betaflight Configurator.
② Connect to computer by USB-C cable, open the Betafight Configurator software and
click connect button - CLI menu, entering "BL" in the menu bar can also enter DFU Mode
(“BL”can be uppercase or lowercase).
After entering the DFU mode, select the "DARWINF411" firmware and version and load
the firmware, then click "Program firmware" and wait for the completion of the
programming to connect to Betafight Configurator.
After the programming is successful, the FC status indicator will also light up again.
售 后 服 务
PROGRAMMING FIRMWARE
售 后 服 务
HOW TO ENTER DFU MODE
2023/4/15 Version V1.0
8