Darwin DF-TM40, Руководство по сборке и эксплуатации

Страница: 14 / 52

14
TM40
2.3 Assembly
Before assembly, take a close look at the individual assembly steps shown and carry out the assembly
in the order given.
L
NOTICE
First loosely screw all parts together and check that they fit properly. Then tighten the screws
using the tool only when you are instructed to do so.
Step 1: Assembly of the left and right handle bar post
1. Connect the middle computer cable (
82
) and the lower computer cable (
83
).
L
NOTICE
Please be careful not to jam the cables. This can result in damage to your treadmill.
2. Mount the left and the right handle bar post (
2
and
3
) on the main frame (
1
) with six allen screws (
10
)
using the supplied allen wrench.