- 7 -
4.2 Wiring terminals
The terminal locations and names are shown in Figure 4-2:
Figure 4-2 terminal blocks
The following table is the terminal definition:
OUT2
+
Current two output positive
V-
Electrode power-terminal
-
Current two output negative
V+
Electrode power + terminal
OUT1
+
Current one output positive
BS
Electrode communication terminal B
-
Current one output negative
R1
Relay one contact
RS485
A
RS485 signal D+(A) end
Relay one contact
B
RS485 signal D-(B) end
R2 Electrode
communication
terminal A
Relay two contacts
AS
Electrode communication terminal A
Relay two contacts
