DARTY CALOR 7517.00, Инструкция по эксплуатации

Страница: 15 / 17

2) Turn the switch to 1 (on).
3) Start shaving :
Legs :
Long hair : use the clippers first. Hold the appliance slightly tilted towards
you and move it slowly against the lie of the hair (FIG 3).
Short hair : use the microscreen. Hold the appliance at right angles to the
skin and move it slowly against the lie of the hair (FIG 4).
Underarms and bikini line :
Long hair: use the clippers. Hold the appliance slightly tilted towards you
and move it slowly against the lie of the hair.
Short hair: use the micro-screen. Hold the appliance at right angles to the
skin and move it slowly against the lie of the hair.
To improve efficiency, stretch your skin with your other hand, in order to raise
the hairs. In this way, you will obtain a closer shave, with little or no irritation.
If your skin becomes irritated, apply a small quantity of talcum powder.
Wait for 24 h before applying perfume or deodorant under your arms.
4) To stop the shaver, turn the switch back to position O (off). The locking
switch will be actived automatically.
5) Unplug the power supply unit after use and replace the protective cover.
Storage : To prevent your appliance from being turned on (or discharging)
while in storage (or while travelling, in your suitcase), press the locking
switch.
D. CLEANING
Important : always clean the appliance’s shaving head after use.
Regular maintenance of the shaving head preserves the shaver’s
efficiency and extends its lifespan.
1) Ensure that your shaver is unplugged.
2) Remove the protective cover.
3) Release the micro-screen support by pressing on the locking clips and
pulling upwards (FIG 5). Carefully remove all hair by blowing on and benea-
th the micro-screen. Clean the shaving head also, with the brush. Never use
the brush to clean the micro-screen.
GB