3. COMMISSIONING
The computer is designed for connection to the following mains voltages:
110V +10 % 50—60 Hz
-15 %
127V +10 % 50-60 Hz
-15 %
220V +10 % 50—60 Hz
—15 %
242V +10 % 50—60 Hz
—15 %
From the factory the automaton, if no other delivery agreement exists
supplied for connection to 220 V mains voltage. A change may only be done
by a specialist.
The set mains voltage is at a selector switch located on the Power supply
is located, to recognize from the outside through the breather.
For commissioning, the computer must be connected to the mains using the
protective earthing cord provided after checking the setting. After
pressing the switch on the lower right side of the Cover is the
operational readiness of the machine by a red indicator lamp is displayed
in the display unit. Before the start of the calculation to press the
(Delete) and (C) keys. The display tubes adjust to the digit "0" and the
calculator is ready for operation.
Opening the calculator is permitted by special tools only for repair
purposes by trained professionals.
9