Rev. 2/14/04
Specifications
Compliance
ANSI T1.403, T1.231, T1.408
AT&T TR54016, TR62411
Verifies
T1 carrier (1.544 Mbit/sec)
SF (D4) and ESF framing, AMI and B8ZS
line coding, Data detection, Signal level
(0 to -37.5 dB)
Error Detection
LOS (red alarm), AIS (blue alarm),
RAI (yellow alarm), Line code violations
(bipolar violations, excessive zeros),
Path code violations (D4 frame bit errors,
ESF CRC errors)
CSU Emulation
Sends RAI (yellow alarm) upon LOS, OOF
or AIS, Responds to CSU loop-up and
loop-down codes
Power Requirement
9-volt lithium (recommended) or 9-volt
alkaline battery
Dimensions
3.6 X 5.75 X 1.3 inches
9.1 X 14.6 X 3.3 centimeters
Shipping Weight
1 lb or 0.45 kg
Operating Temperature
0 to 45 degrees centigrade
Non-condensing
User Interface
Single pushbutton Autotest!
2 X 16 LCD display
Six status leds & audio beeper
Media Access
Single RJ48C connector
Transient & over-current protection by Teccor
Assistance
Customer support is obtained through the distributor from which you purchased
your tester. If you encounter problems or cannot locate your distributor, you may
reach us via fax at (765) 497-3337 or via our website at:
www.darkstartechnologies.com
Warranty
Darkstar Technologies warrants its products against defects in materials or
workmanship for a period of one year from the date of purchase. Any product
that is returned shipping prepaid will be inspected and tested, and items meeting
warranty conditions will be repaired or replaced free of charge. Please contact
your distributor if repair or replacement is required.
