Darkglass Microtubes B7K, Руководство пользователя

Страница: 4 / 7

Controls
Blend : Mixes the clean input signal with the overdriven signal.
The clean signal remains at unity gain while the volume of the
overdriven signal is set by the Level knob, allowing for fine
control of the blend ratio.
Level
: Sets the volume of the overdriven signal.
Drive : Sets the amount of gain in the overdriven signal.
Grunt Switch
: Sets the amount of low frequency content to
saturate by selecting between three different bass boost
levels before the clipping stage.
Attack Switch : Sets the amount of treble content to saturate:
The "Boost" setting emphasizes the treble content extra
clarity and presence. The "Flat" position leaves this register
untouched while the "Cut" position will reduce the amount of
high frequencies being saturated.
Low
: +-12dB @ 100Hz |
Low Mids
: +-12dB @ 1kHz |
Hi
Mids
: +-12dB @ 2.8kHz |
Treble
: +-12dB @ 5kHz.
Parallel Output : Hardwired copy of your input signal, useful
for getting a clean signal in recording and live situations
Direct Output
: A balanced version of the ¼” output, useful for
running into PA’s or studio mixing consoles.