Darkglass ELEMENT, Руководство пользователя

Страница: 2 / 8

Element
Cabsim · Headphone Amp
One comprehensive device, that out of the box offers a
bank of 5 cabinet simulations, and the ability to change
them through the Darkglass Suite, Bluetooth
technology to listen to backing tracks while playing,
rehearsing, or studying. Two headphone outputs to
allow interaction among musicians. XLR output to
connect the Element to your audio interface or PA
system.
With a uniquely innovative approach, the Element
provides in one device an immensely practical tool to
empower modern musicians.
Warning
The Element has a current draw of 250mA. Only use a
regulated 9V DC adapter with a center-negative plug.
Due to ecological reasons, it does not accept batteries.
Unregulated power supplies and/or higher voltages
may result in suboptimal noise performance and even
damage your unit, voiding the warranty.
Warranty
To activate the warranty, we encourage you to register
your product on: http://mypedal.darkglass.com and
enter the serial number on the back of your pedal.
Please contact us via email support@darkglass.com
before shipping a product to us.
Controls
Phones:
Two touch sensitive volume control sliders, one for
each headphone output.
Blend:
A touch sensitive slider to set the blend between the
main input (Intrument/Amp in) and the backing track
(Bluetooth/Aux in) for the headphone out mix.
Technical Specifications
Input Impedance 2 Mohm, 18 kohm, 12 kohm
Current Consumption ~ 250 mA
Voltage 9V-12V (Center Negative)
Dimensions
Width: 64 mm (2.95 in) | Height: 111 mm (4.37 in) | Depth :
35 mm (1,77 in) | Weight: 230 g (0.50 lb)
EMC / EMI
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC
rules. These limits are designed to provide reasonable protection
against harmful interference in residential installations. This
equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference
will not occur in a particular installation.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
· Reorient or relocate the receiving antenna.
· Increase the separation between the equipment and receiver.
· Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
· Consult the dealer or an experienced radio / TV technician for help