The Microtubes 900™ V2 is a 900W amplifier equipped
with an all analog preamplifier, Class D Power Module
and a digital impulse response cabinet emulator for DI
outputs or headphones.
Probably the first thing you will notice from the
Microtubes 900 is its unusual control layout: On the
right side you’ll find the clean section which is the
foundation of your sound.
It features Gain and Master volumes and active 6 band
EQ. Along with the mandatory Low and Treble controls
you will find 250Hz, 500Hz, 1.5KHz, 3KHz sliders.
Character is all in the midrange, by having 4 dedicated
Mid controls allow you to cover the whole mid range
(250Hz to 3kHz) you have total control and flexibility
over the amplifier’s character.
On the left side, by the Input jack you will find the
Microtubes® Engine which acts as an extra channel
that can bring your crisp clean sound to the next level
by helping you cut through any mix while adding
anything from subtle tube break up, harmonics and
natural compression to obliterating distortion.
DESCRIPTION
The Microtubes Engine can be engaged via the front
panel or via our own digitally controlled ™ (jack on rear
panel). Besides engaging the Microtubes circuitry you
can hold the actuator to Mute the amplifier.
The Intelligent Footswitch is housed in an elegant,
laser engraved unibody chassis and requires a
standard ¼” mono cable (not included) for it’s full
operation.
Besides this incredible versatile preamplifier, we
equipped the power module with some unique control
over the power output and minimum speaker loads:
The standard mode will deliver 900W RMS at 4
Ω
/500W
at 8
Ω
. If you select the 2
Ω
Mode via the rear panel
switch the amplifier will deliver 900W at 2
Ω
/500W at 4
Ω
and 350W at 8
Ω
.
This deceivingly simple feature allows for maximum
power adaptability: It doesn’t matter the cabinet
configuration or power requirements, the Microtubes
900 will deliver accordingly.
