Darkglass Electronics Microtubes 500 v2, Руководство пользователя

Страница: 4 / 10

COMPRESSION
: This knob controls the amount of
dynamic compression added to the Microtubes Engine.
The make up gain is adjusted automatically. The
compression can be turn off or assigned using the
Darkglass Suite for each mode separately (Clean, B3K,
and VMT).
DRIVE : This knob controls the amount of distortion that
the Microtubes Engine will deliver. It will change from a
soft warm overdrive to a massive modern distortion
sound.
TONE : This knob controls the high harmonic content of
the Microtubes Engine via a variable low pass filter:
crank it up for additional attack and definition or dim it
down for a smoother sound, especially handy if already
running bright clean EQ setting or cabinets with
tweeters.
LEVEL : Use this knob to control Microtubes Engine’s
output volume.
BLEND : Use this knob to mix between the Clean signal
and the DIstortion signal (Microtubes Engine).
B3K/VMT : This push-button switch selects between two
overdrive voicings: B3K® mode will deliver an
aggressive, percussive sound while the VMT will bring
up the mids for a warmer, more neutral character.
BASS
: +-12dB at 80Hz. Use this knob to change the low
content of the signal.
MIDS: +-12dB at 250, 500,1.5K and 3Khz. This graphic eq
control the mid content of the signal.
TREBLE : +-12dB at 5kHz. Use this knob to change the
high content of the signal.
MASTER : Use this knob to control the overall volume of
the amplifier.
MUTE : Use this push button to mute the amplifier.