16
9.
Position the top panel on the frame, then use the included Hex Screwdriver to secure it in
place using the six screws removed in step 7.
10.
Use a flat blade screwdriver (not included) to secure the center shaft at the bottom of the
joystick to prevent it from turning, then screw the small ball back onto the top of the
joystick.
11.
For each button, insert it into the top panel, then rotate it until you hear a click, indicating
that the button is locked into place.
12.
Reconnect all wires to the buttons. The following chart shows which color wires connect to
each button.
13.
Position the base plate on the frame, then use the Hex Screwdriver to secure it in place
using the seven screws removed in step 2.
14.
Open the STORAGE SPACE cover, then insert the Hex Screwdriver into its storage spot. Close
the cover.
