SPT100 USER’S GUIDE
Copyright © 2011 Darim Vision Co, All Rights Reserved
8
Figure 3. SPT100 connections
WARNING:
Be sure to use only one active power source at a time: PoE (Power-Over-
Ethernet) or external power supply.
2.3 Powering up
The SPT100 camera requires apparently 25 seconds from the power up moment for booting. It
will automatically start the tilt and pan calibration once the boot process is finished. The
camera will be ready for operation as soon as the calibration camera movement stops. In order
to turn the unit off, just remove the power source, no other special handling is required.
