Darex XT-3000, Руководство по эксплуатации, Страница: 16 / 36

16
CLEAN UP TURNS:
By selecting “Clean up turns”,
The display shows:
The “Clean up turns” is active only when in “Auto”
Sharpening mode.
Pressing “Arrow up”
advances clean up pass
by one.
Pressing “Arrow down”
reduces pass by one.
Pressing “Save ”,
stores and exits.
Pressing “Exit”,
exits without saving.
AUTO/MANUAL SELECT:
By selecting “Auto/Manual”,
The display shows:
Pressing “Arrow up” or “Arrow down”
will highlight each menu option.
Display Details
Pressing “Save ”, stores and exits.
Pressing “Exit”,
exits without sav-
ing.
AUTO:
By selecting “Auto”,
The display shows:
When “start” is pressed, the
sharpening fixture will begin to
sharpen.
During sharpening, you will see the num-
ber of rotations on the screen increase.
When the grind is complete, the pro-
grammed cleanup passes will appear and
begin to count down to 0. The sharpening
port will rotate to the home position and
stop.
At the end of each sharpening, the Bit
Count increases.
By pressing “stop”
during the Auto
Cycle the unit stops and returns home.