***WARNING***
INTERNAL BATTERIES MUST
BE REMOVED BEFORE
EXTERNAL BATTERY IS
CONNECTED
Use the battery clips to
connect to the corresponding
terminal of the battery
The DS140 Series are also able to operate with an external 6 or 12V battery.
To connect the External Battery, first remove the internal D-cells. Connect the
wires provided to the underside of the unit using flat female connectors.
The '+' is on the same side as the control switch and the '-' is on the other.
To connect the fence wire or tape, loosen the Live Terminal
Knob (B) and remove.
Lift up the Fence Wire Clamp (C) and place the fence wire or
tape underneath.
Replace the Fence Wire Clamp (C) and Terminal Knob (B) and
tighten sufficiently until a good connection is achieved.
Do not over tighten.
Fence Tape or Wire
External Battery Connection
Tape / Wire Connection