6 Replacing Splitting Heads
32
OM Hydraulic Stone and Concrete Splitter, Version 1.0 04/2010
6.2.2
Replacing the splitting wedge
A
B
1
Screw
2
Splitting wedge
3
Plastic cap (not visible)
4
Bolt
5
Mandrel for pounding out the bolt
Fig. 6-2-2 - 1
Replacing the splitting wedge
z
Remove both pressure pieces as described on the previous page.
z
Extend the splitting wedge (2) completely
(operating lever in position F).
z
Switch off the hydraulic aggregate and protect it against accidental start-
up!
z
Remove the screw (1) and the plastic cap (3) on the opposite side (fig. A).
z
Bang the bolt (4) with a mandrel (5) and a hammer out of the wedge head
(fig. B).
z
Pull the splitting wedge out of the splitting cylinder.
z
Assemble another splitting wedge in the reverse order.
Using the splitting wedge with a not completely inserted bolt leads to dam-
age or destruction of the splitting cylinder!
z
Before start-up
, close the screw opening by
completely
tightening the
screw (1).
z
Assemble the pressure pieces as described in the previous chapter.
6.3
Maintenance Every 6 Years
z
Regardless of the number of operating hours, have the hydraulic connections
replaced by the manufacturer or a person authorised by the manufacturer every
6 years.
