SET UP INSTRUCTIONS
1
5
7
9
6
8
10
Select a well drained, clean and level surface.
Unroll into your desired position.
Set up the
ridge
pole C (1 piece) and place one end
through the eye in the apex of
dome
pole A.
Starting from the middle top, clip the canvas shell to
dome
poles A and B.
Insert poles D (2 pieces) into the ends of
the
ridge
pole.
4
Secure to the ground using a peg in each pin and
ring, and four corner leaf peg points.
Repeat this process, place the other end of the
ridge
pole through the eye in the apex of
dome
pole B.
Clip the roof to the
ridge
pole C.
Attach the eyelet at the end of the adjustable
awning strap to the end of poles D. Tighten
awning straps so the roof is taut.
3
Place the ends of both
dome
poles A and B into
their relevant pin and rings.
10
9
Next page - installing the fly
2
Assemble the frame – ‘Set up’ the two
dome
poles
A and B.
A
B
A
B
D
C
