4
I N S T R U C T I O N M A N U A L
PACK DOWN
1. Partially close all the zips and door covers. Leaving them slightly open will allow for the air to escape while
rolling up the swag. Remove the pegs and roll up the guy ropes.
2. Release the adjustable head pole and remove from the middle eyelet.
3. While the swag is laid out flat, bring any over overhanging canvas and ropes into the centre of the swag.
Beginning from the foot end, start rolling the swag as tightly as possible in an attempt to expel as much air as
possible to achieve a compact roll. Tip: Using your knees, or two people while rolling, will assist in getting the
swag as compact as possible. Just before completing the rolling process, place the disassembled pole within
the swag and continue the rolling process to the end.
4. Bring the two compression straps together and loop through the doubled-rings, do not over-tighten the straps.
NOTE
Allow a wet or damp swag to dry thoroughly before pack down. If this is not possible, unroll swag as soon as
possible. Allow to fully dry out before re-packing and storing
SPARE PARTS LIST
For a full list of Spare Parts available refer to DARCHE.COM.AU
