D A R C H E . C O M . A U
STEP 3.
Swing out rear arms to 90°. Then swing out the front
arm fully.
STEP 4.
Attach front arm to roof rack using supplied tension
strap - Tension gently.
STEP 5.
Swing out rear arms fully toward rear of vehicle and
attach to roof rack using supplied tension strap. Tension
fully, adjust front arm tension.
TIP:
You are now set up for freestanding mode. Max
freestanding wind rating is 25 - 30 km/h. We recommend
going through the next steps to fully set up your awning.
TIP:
In case of rain, lower the support legs to allow slight downward slope & guy off between rafters to form valleys for water run-off.
STEP 6.
Undo the straps securing each support leg. Leg will pivot
down to a vertical position. Adjust to desired height by
unlocking & locking the internal twist locking mechanism
STEP 7.
Secure the end of each rafter by anchoring and
tensioning guy ropes.
STRAP ARMS TO
ROOF RACK
