DARAY X740, Руководство по эксплуатации и установке

Страница: 18 / 32

Page 17 of 30
Terminal block
Non-slip washer
Nut
CAUTION: This product must be earthed.
Check you have all of the items included in the checklist on Page 7
Note the mounting position advice and warnings offered in Section 4.1.1 Considerations on
page 10
Flush-fitting the wall box (chased-in cables):
 Remove the 4 cover screws from the wall mounting box with the hex wrench provided

Feed the mains supply via the cable entry hole on the back plate

Connect the mains supply to the fused terminal block found on the back plate

Using the back-plate as a template, mark its position on the wall, bearing in mind
the final position of the light-head. Fixing point dimensions on page 16 of this manual
 Fix the bracket to the wall

Fit the power supply module to the wall bracket with the 4 cover screws

Switch the power on and check for correct operation