DARAY SL730LW, Руководство по эксплуатации и установке, Страница: 12 / 48

Page 11 of 43
4.2 Mobile Mounted Version
Please refer to the packing list earlier in the manual (section 1.4, page 5) before commencing
the assembly procedure, to ensure that all parts can be located. Each screw required should
already be fitted into its designated hole – ensure to remove these when reaching each
relevant section within the below instructions.
The mobile base assembly will come supplied with the wheels already fitted. Ensure to apply
the brakes before commencing the assembly process, to prevent movement and aid assembly.
Fig.1 Fig.2
Within your kit you should identify two pieces of the upstand. Feed the wire (see fig.3) from
the mobile base through the shorter of the two pieces, noting that the end with the four
screw holes should be uppermost, then place this part in the circular housing in the top of
the base. Do not secure this part yet.
Fig.3 Fig.4
Locate the second (longer) piece of the upstand with the curved end uppermost, and remove
the four screws from the straight end. Then, connect the cable from the first piece of the
upstand to the cable trailing from the bottom of the second piece of the upstand. (see fig.5).
Then, slot this piece into the first part of the upstand that we assembled earlier whilst
feeding the excess cable inside the longer tube.
Front of mobile
base
Rear of mobile
base