cPCI-FRM11 User’s Manual (Rev 1.1)
-
13
- http://www.daqsystem.com
8
X3+
Camera link LVDS receive data3 +
9
Xclk+
Camera link LVDS receive clock +
10
X2+
Camera link LVDS receive data2 +
11
X1+
Camera link LVDS receive data1 +
12
X0+
Camera link LVDS receive data0 +
13
Inner Shield
14
Inner Shield
15
CC4+
Camera Control output 4+
Refer to Figure 4-6
16
CC3-
Camera Control output 3-
Refer to Figure 4-6
17
CC2+
Camera Control output 2+
Refer to Figure 4-6
18
CC1-
Camera Control output 1-
Refer to Figure 4-6
19
SerTFG-
Serial to Frame grabber-
20
SerTC+
Serial to
21
X3-
Camera link LVDS receive data3-
22
Xclk-
Camera link LVDS receive clock-
23
X2-
Camera link LVDS receive data2-
24
X1-
Camera link LVDS receive data1-
25
X0-
Camera link LVDS receive data0-
26
Inner Shield
(Note) For more information, refer to Camera Link Standard Specification.
CCx+
CCx-
Camera Control
Figure [4-6] is a Camera Control output circuit from cPCI-FRM11 board to Camera for the
specific control of the Camera-link Cable.
The cPCI-FRM11 board has four differential digital outputs. You use a Trigger out to be selected
one of the four CC(Camera Control) in case of the Line Scan Camera. Each output is mapped by
Digital output. Below picture display that each bit position set from 12 to 15 of digital outputs.
