DAQ system USB3-FRM22, Руководство пользователя

Страница: 9 / 29

USB3-FRM22 User’s Manual
8
27 CNT3 Sensor General Purpose IO3 Using SDIO_xxx
function
28 C_L2_RXD or D_L3_RXN C_lane2_RX_D or D_lane3_RX_N C : C-Phy, D : D-Phy
29 GND Ground
30 GND Ground
31 GND Ground
32 C_L1_RXA or D_CLK_RXP C_lane1_RX_A or D_CLK_RX_P C : C-Phy, D : D-Phy
33 GND Ground
34 C_L1_RXB or D_CLK_RXN C_lane1_RX_B or D_CLK_RX_N C : C-Phy, D : D-Phy
35 MCLK Master Clock
36 C_L1_RXC C_lane2_RX_C C : C-Phy,
37 GND Ground
38 GND Ground
39 SP4 SENSOR Power
40 SP5 SENSOR Power
(3) J2 Connector
It is a connector used as SPI (Serial Peripheral Interface).
[Figure 2-5. J5 Connecter (Top View)]
[Table 3. J2 Connecter Description]
No. Name Description
1 F_SPI_SCK Serial Clock
2 F_SPI_SSN Slave Select
3 F_SPI_MISO Master Input, Slave Output
4 F_SPI_MOSI Master Output, Slave Input
(4) J6 Connector
External input 12V power connector.