DAQ system USB3-FRM13 K, Руководство пользователя

Страница: 43 / 47

USB3-FRM13 User’s Manual
42
A, B phase Up
A Phase
B Phase
A, B phase Down
A Phase
B Phase
(8) “Trigger Start”
When click, it starts a Area Camera Trigger.
(9)
“Trigger Edge Mode”
When click after Trigger starts, it operates Edge Mode. Default value is Level Mode.
[Refer chapter 2-6.]
(10) PoCL Delay
The delay time can be set when powering a camera using PoCL
(Power over Camera Link). It selects from 0.5 sec to 4 sec. The default value is 0.5 sec.
(11) “Auto Save” toggle
If the box clicks, image data is stored as a binary file below the specified D:\SAVE (or
user-selected folder). The bottom of “Save Count” shows number of stored frames.
In case of JPEG, it does not work in 64-bit OS.