USB3-DIO01 User’s Manual
22
5-1 Image Frame Function
(1)
“Device Open” button
It starts a selected board device. If the value is "0", the device is not connected or no
device.
(2)
“Device Close” button
It closes the Device.
(3)
“LVDS Init” button
Video Data Mode to 8bit, 16bit, 24bit, 32bit, 16bit YUV of image frames, and then initialize
the function of receiving image frame data. It is performed only once after power is applied
to the board.
(4)
“LVDS Close” button
It closes the image frame acquisition.
(5)
Selection Input/Output
USB Input
--- To select the input board. (For future Upgrade)
USB Output
--- To select the output board. (when USB3-CA01 connect)
Caution) This is the function description(6-13), when a function is selected as USB Input,
(For future, These functions are currently not available.)
(6)
“Get Res.” button
It shows the image resolution.
(7)
“Start” button
It starts the image transfer. It is a Toggle button, press again stop the image transferring.
(8)
“Once” button
It is a Toggle button. When the button presses, it displays a stop image at that time.
(9)
“View” button
Image Transfer begins to start.
(10)
“Data” button
Press this button to read the image frame data of the board to your PC. If image frame
data is not saved on the board, you must wait until the end of data collection.
