USB-AIO10 User’s Manual (Rev 1.1)
-
7-
http://www.daqsystem.com
3.
Installation
Explains how to install the USB-AIO10 to PC and check the device.
3.1 Package Contents
After unpacking, inspect the board carton to make sure there are no damages on the board.
-
USB-AIO10 Board
-
USB(A-B) Cable
-
Installation CD (Driver/Manual/API/Sample Source etc.)
3.2 Installation Sequence
To install USB-AIO10 board in your environment, do the following steps. The USB-AIP10 board
is completely Hot-Plug and Plug & Play. Therefore, you can install it easily.
The required PC operating system for the USB-AIO10 is Windows 2000 SP4 or Windows
XP/7/10.
(1) Install the USB-AIO10 board into your system.
(2) Connect USB A-B cable between the case and your PC.
The Add New Hardware Wizard will appear in order to install the driver for new hardware.
(3) The Add new Hardware Wizard will install the driver in the following process. The following
install process is explained based on Windows 7 operating system.
