PCIE-HDMI01 User’s Manual
13
The program execution sequence to view the image is as follows.
①
“Open” click
②
Select from PORT A/B
③
After click Set Resolution / RGB or YUV Out / Bit Set. I.C Set click
④
“Dev. Init” click
⑤
Check the resolution with “Get Resolution”
⑥
Click the “Start/Stop” toggle button click to start or stop the video.
(1)
“Open” button
Start the device of the selected board.
(2)
“Board#” selection
In case of multiple PCI Express boards, 4 board numbers (0 ~ 3) are assigned.
(3)
“GetVer.” button
Here comes the FPGA version of the board.
(4)
“DDR Use” toggle
Check when using DDR Memory.
(5)
“Port Set” Selection
Select when selecting
Port A/B. (Default: Port A)
(6)
“Device Init” button
Initialize the device. Performed only once when first power is applied.
(7)
“Dev. Close” button
Called when the use of the board is complete and the program is ended.
(8)
“Get Res.” button
Shows the image resolution.
(9)
“Start/Stop” toggle button
The camera transmits or stops the image frame.
