PCIe-FRM13 User’s Manual
30
The sample program execution sequence is as follows.
Get the resolution of the sensor with Get Size.
1.
Get the resolution of the sensor with
Get Size
.
2.
Device Init
Set the frame size to the resolution of the sensor.
3.
Start
4.
Video Data Bits
Select the type of input video
5.
Frame View
Actual frame driving function
6.
Auto View
Shows frames in succession
(1)
“Board #”
Up to 8 devices can be selected from Board #0 to Board #7. (Set to J6)
(2)
“Get Ver.”
It shows the FPGA version.
(3)
“Resolution“
Select according to the input resolution. (Resolution setting of Frame Grabber)
-> Set the Grabber's resolution, not the resolution of the data coming from the sensor
The resolution provided by the APP is as follows. :(640x480, 800x600, 1024x768, 1280x720,
1280x1024, 1600x1200, 1920x1080, 1920x1200, 2048x1536, 2560x2048, 4080x2448)
“Set Detected”
button:
Set the resolution obtained from
“Get Size”.
-> Set the resolution of the data coming from the Camera Link Cable to the resolution of
the Grabber.
