PCIe-AIO15 Users Manual (Rev 1.0)
-
15-
http://www.daqsystem.com
4. Analog Input Connection
4-1. Unbalance Input
ADC CH0-3
EXT
Sensor
1
1
3
J2, J7, J9, J11 Jumper Setup
[Figure 4-1. Analog SE (Single Ended) Input Connection]
An analog SE connection connects a signal to a Positive port, a ground to a Negative port. And,
a J1~J4 connecter of board connects like Figure 4-1.
4-2. Balance Input
ADC CH0-3 +
EXT
Sensor
ADC CH0-3 -
2 3
1
1
3
J2, J7, J9, J11 Jumper Setup
[Figure 4-2. Analog DI (Differential Input) Input Connection]
An analog DI connection input basis is a difference between two input channel pairs. The input
pairs connect according to Positive, Negative Input Port. And, a J1~J4 connecter of board
connects like Figure 4-2.
