6
Ordercode: D6534
VPC-12
06)
Connect the main feed cable (+) to the OUT+ connector, and connect the other end to the main
feed connector on your speaker.
07)
Now, if you press the emergency button, the circuit will open. The 100V amplifier outputs will be
muted and the emergency signal will be audible.
Troubleshooting
DAP Audio VPC-12
This troubleshooting guide is meant to help solve simple problems. If a problem occurs, carry out the steps
below in sequence until a solution is found. Once the unit operates properly, do not carry out following
steps.
01)
If the device does not operate properly, disconnect the device.
02)
Check power from the wall, all cables, connections, etc.
03)
If all of the above appears to be O.K., connect the unit again.
04)
If nothing happens after 30 seconds, disconnect the device.
05)
Return the device to your DAP Audio dealer.
Product Specifications
Line voltage:
100V
Power consumption:
12W
Material:
ABS
Mounting::
flush, surface
Mounting hole:
Ø 50 mm
Dimensions:
80 x 40 x 155 mm (LxWxH)
Weight:
0,28 kg
Design and product specifications are subject to change without prior notice.
Содержание VPC-12
Страница 8: ... 2021 DAP Audio ...
